Tavolo Luna Veneziana

Products > Furniture > dining table with strip decor base

Tavolo Luna Veneziana is a dining table with strip decor base. Tavolo Luna Veneziana, a luxurious and elegant addition to any dining room. The table’s clean lines are beautifully balanced by contrasting tones, creating a striking and sophisticated look. The elegant round top dining table is supported by a single pillar base that can be customised to your taste with a selection of colour combinations and finishes. The top has a diameter of 1450 mm and the base is 450 mm making this table perfect for any high-end dining room. Tavolo Luna Veneziana is manufactured at our design studio in approximately 6-10 weeks. Each item is made-to-order and can be specified with an array of colours and syles. Please see specification below. The sizes shown are representative only, as your item will be made to your specific size and fitment requirements. Parameters for width, height and depth (w x h x d) measurements are quoted as a guide.

Our Tailor-made⁺ solution ensures quality and function, and provides the opportunity to produce the truly bespoke. To discuss your interior design and home décor requirements speak with our design technicians who can walk you through the various options and discuss how to bring your ideas to reality.

Specification
Dimensions (mm) (tolerance ±2 mm)	Diameter: 1450 Height (H): 760
Top thickness	6 mm
Base design	Circular with strip decor
List price	£3700

Tavolo Pedestal Base and Legs
Item	Veneziana Ellipse Pedestal Base
Shape	[ Circular ][ Semicircular ][ Oval ]
Description	Ellipse pedestal base with Veneziana decoration for Tavolo table tops
Model	TOV-BP101
Notes	Coffee tables are typically 250 - 400 mm in height. Side tables are 600 mm. The standard height of a dining table is 760 mm and console tables are often 900 mm high. The thickness of your table top will also affect the required leg height, therefore our pedestal legs are designed with a height variation of up to 5 cm to ensure when paired with a Tavolo Table top, they achieve the table height specified.
Table Height	[ 250 mm ][ 400 mm ][ 600 mm ][ 760 mm ][ 900 mm ]
Price	Circular / Semicircular	Oval
Diameter	[ 200 mm ]	[ 200 x 400 mm ]
Diameter	[ 350 mm ]	[ 350 x 700 mm ]
Diameter	[ 450 mm ]	[ 450 x 900 mm ]

Tavolo Pedestal Base Cont...
Item	Greca Rectangular Pedestal Base
Description	Rectangular pedestal base with Greca decoration for Tavolo table tops
Model	TOV-BP201
Notes	Coffee tables are typically 250 - 400 mm in height. Side tables are 600 mm. The standard height of a dining table is 760 mm and console tables are often 900 mm high. The thickness of your table top will also affect the required leg height, therefore our pedestal legs are designed with a height variation of up to 5 cm to ensure when paired with a Tavolo Table top, they achieve the table height specified.
Table height	[ 250 mm ][ 400 mm ][ 600 mm ][ 760 mm ][ 900 mm ]
Dimensions	Length: 300-1200 mm Width: 300-1200 mm
Price
Top view	Square	Rectangular
Side view

Tavolo Pedestal Base Cont...
Item	Fluted Rectangular Pedestal Base
Description	Rectangular pedestal base with optional fluted decoration
Model	TOV-BP301
Notes	Coffee tables are typically 250 - 400 mm in height. Side tables are 600 mm. The standard height of a dining table is 760 mm and console tables are often 900 mm high. The thickness of your table top will also affect the required leg height, therefore our pedestal legs are designed with a height variation of up to 5 cm to ensure when paired with a Tavolo Table top, they achieve the table height specified.
Table height	[ 250 mm ][ 400 mm ][ 600 mm ][ 760 mm ][ 900 mm ]
Dimensions	Length: 25-900 mm Width: 25-900 mm
Fluted Decoration	The pedestal base on this page can be specified with or without fluted decoration. Fluted decoration is available in flute widths: [ 20 mm ][ 25 mm ]
Price	Non-fluted	Fluted
Top view
Side view

Options
Colour	Choose from our Tailor-made+ Collection.
Finish	[ Natural ][ Polished ][ Honed ] Availability of finish is dependant on chosen surface colour.

Notes
Liability	Please note that we cannot be held responsible for the structural and plumbing aspects of installation. We therefore accept no liability for damage to the item during installation. We strongly recommend choosing a reputable and qualified professional for installation of this item.
Preparation	Two people may be required to safely handle and install this item. Due to the considerable weight of Tailor-made+ items, when wall-mounting the walls or support structure to which it will be fixed must be checked and verified by a structural engineer. The installation should only commence once these supporting walls meet the necessary standards. When wall-mounting, ensure that all electrical works, wall plumbing and pipe works have been carried out prior to installation. Only once the fixing brackets have been securely mounted, should tiles be fixed to the wall.
Composite structure	The internal structure of Tailor-made+ items depends on the weight and product type. See here for more information.
Order process	Clients are encouraged to discuss their project with our Tailor-made+ consultants. We have a highly trained team of architects, engineers and account managers who will provide assistance through the entire process. This includes documenting your design, configuring options, confirming sizes and arranging delivery. Once the technical requirements for the project have been documented, our CAD technicians will prepare a technical drawing of the item for your signed approval. As soon as approval has been received and payment has been arranged, manufacturing will commence at our state-of-the-art UK studio.
Delivery & packaging	Delivery & packaging cost will depend on the size and weight of the item and delivery postcode. The final cost will be communicated during your order confirmation. Each item is individually packed in a custom built enclosure. These enclosures ensure that stress and flex is not transferred to the item during transport. The enclosure is then wrapped and sealed in plastic.
Lead time	Lead time 6-10 weeks from payment confirmation and receipt of signed technical drawing.
Disclaimer	Please note that while every effort will be made to supply goods to the size and colour specified, due to the handmade nature of these items, slight variations may occur. We adhere to a dimensional tolerances limit of ±0.3%. It is also impossible to choose a specific graphical face or area of the tile and its location within the item. Where sizes are specified by the customer these are assumed to be the total dimensions to be made including any fixtures or fittings. Updated V.23.174

The photographs contained within these pages are for illustrative purposes only and may not exactly match the product itself or the finish and pattern of the item supplied. The photographs and illustrations do not comprise any contractual warranty on our part and you should not rely on them as an exact representation of the product.